Product Information

RIS Hi-Pave

RIS Hi-Pave

RIS Hi-Pave High speed GPR A ground penetrating radar solution designed for high speed road assessment surveys, RIS Hi-Pave is able to operate with several antennas at the same time.
Specifications
Brand: IDS
Model No: HI Pave
Detailed Description

Pavement Testing Equipment

SB Enterprises provides a wide range of Road and Runway Pavement testing equipments which are essentially required for both quality testing at time of construction and estimation of remaining service life of pavement to allow estimation or planning for resurfacing.  

SB Enterprises also provides Slope and structure monitoring in 2D and High-resolution radar system for early warning and real-time monitoring of buildings, dams, tunnels, mining infrastructures, and cut-slopes. S.B Enterprises is also the exclusive distribution partner to Leica Geo Systems & IDS Geo Radar  for Consturction Division also referred to as 3D Ground Penetrating Radar for concrete inspection and Compaction quality of check 3D imaging of shallow and deep rebars in concrete -  On Site Compaction testing of Surface, base and sub-base road course assessment Road, Railway and Pipeline construction,Airport runway condition assessment



A ground penetrating radar solution designed for high speed road assessment surveys,  RIS Hi-Pave is able to operate with several antennas at the same time.  The system provides a complete assessment of road conditions, such as

 

  • Pavement thickness measurement;
  • Surface, base and sub-base road course assessment;
  • Detection of cavities, voids and delamination;
  • Location of cracks;
  • Detection of wet areas;
  • Airport runway condition assessment.

The RIS Hi-Pave features:

  • Horn Antennas: Achieve high speeds without damaging the antenna. Equipped with air launched horn antennas, these can be used without contact with the surface.
  • Speed: Hi-Pave is the fastest ground penetrating radar for road evaluation at three times the rate of the nearest radar in the market. It can reach up to 260 Km/h with a single antenna configuration and 10 cm data sampling or 130 km/h with a dual antenna configuration and 10 cm data sampling.
  • Semi-automatic procedure for layer recognition: The post processing software uses a semi-automatic procedure to collect information of road subsurface layers.
  • Modular: Hi-Pave can operate with up to eight antennas in a chain connection using the same control unit. This can also include lower frequency antennas (typically a 600 MHz* or a 400/900MHz dual frequency) for grade and subgrade evaluations.

Benefits of the RIS Hi-Pave include:

  • Pavement status evaluation for new road construction (comparing completed pavement, grade and sub grade against design specifications);
  • Periodical status monitoring of road and runaway conditions for preventive maintenance;
  • Minimise survey and processing time with high-speed GPR and semi-automatic layer detection
  • Flexible solution that can integrate up to eight GPR antennas;
close

Send Your Message

Email Id
Error message
Subject
Message
Enter between 5 to 3,000 characters, English only.

Enter Image Text *
Your message has been sent successfully.
Your message has been sent successfully. Thanks for register as non member.
Contact Person
( Partner )
Location : Pune
Call : +91 9503508453